Since 1990, Hyper-Formance has been bringing you the finest quality reproductions available. My shift knobs are made by the original vendor. My head badges are made on the original tooling. My chrome and Cad plated parts are as correct as possible, right down to the correct flaws in the surfaces. Unless otherwise noted, most parts below are Hyper-Formance reproductions.
| Sting-Ray Cable Set $18.00 Includes: 1) 60" Rear Brake Housing, long enough to fit rear disc brake models (44" is needed for non-disc applications) 1) 38" Front Brake Housing, long enough to fit the Krate front Atom brake...can be shortened for other models. 1) 27" Stik-Shift Cable Housing fir Five Speed models. 3) Inner wire assemblies to fit above. 2) Brake Cable Ferrules to fit into the brake levers. |
 |
||
| Coaster or Three Speed Chains $12.00
each Five Speed Chains $12.00 each |
|||
| Rear Disc Brake Caliper Step-Bolt &
Nut! Chrome Plated, AWESOME! Normally $30.00 each, SPECIAL!!! $20.00 each!!! Tech Tip: Do NOT over tighten!! The caliper is supposed to hang loosely and pivot. Over tightening is why you now need a new bolt :-) |
   |
||
| Atom Brake Lever Jam Nut $4.00 each |
  |
||
| Krate Atom Brake Front Axles are
AVAILABLE!! $22.00 each! Awesome detail! Nicely Plated! |
 |
||
| Just In! Double Cable Clamps! $20.00 each |
 |
||
| "STRATOLITE" Three Inch
Reflectors "Pat. No. 2676518" "No. 38" "SAE-A" Sorry, no longer available :-( |
  |
||
| Wow! Imported from England! This stuff is the most awesome clearcoat I've found! High-solids, incredible gloss, easy application, fast drying, UV resistant....this Clear will look like you sprayed it from a gun! Expensive, but worth it! $29.00 for a 450ml can, enough to do one bike with ease. I am always trying new products, and this Clear really impressed me! |
 |
||
| Five Speed Rear and Atom Front Axle Nuts, Correct Chrome. $4.50 each |
 |
||
| Shock Pivot Nuts (only) $10.00 pair |
 |
||
| 1968 Krate Atom Brake Clevis Assembly. Awesome! $16.00 each |
 |
||
| Krate & Super Deluxe Springer Pivot Bolt $15.00 & Nut $7.00 |
 |
||
| Genuine Schwinn Slim-Line
Handgrips
Made by original vendor on in the original molds. Sorry, these have been discontined :-( |
  |
||
| NOS Schwinn Brake Lever
Covers. The REAL Thing! While they last! $25.00 /Pair! |
  |
||
| NEW!! Smooth Shifter Covers
with a Stik-Shift Donut decal! No Longer Available :-( |
 |
||
| Ribbed Shifter
Covers with a Stik-Shift Donut decal! No Longer Available :-(
|
 |
||
| Top row: Original Shifter
Covers
Bottom: My New Reproductions! |
 |
||
| Top row: Original Shifter
Covers
Bottom: My Reproductions! |
 |
||
| Left: My New Reproduction
Right: Original Cover |
 |
||
| Dudes and Dudettes,
All the time guys and gals are asking
where they can get a copy of the 900+ page Factory Schwinn shop
manual. I always tell you to go to your local library for "Glenn's
Complete Bicycle Manual" but, most libraries no longer have
it....
Well, now I DO! 332 pages! Hundreds
of pictures! All directly out of the Factory Manual!
Last printed in the mid 70's, I have
obtained several copies from a used book store. They are in good
to excellent condition.
Blow-up pics and how-tos on every
part of a Sting-Ray. Hubs, brakes, derailleurs, freewheels...EVERYTHING!
Only $30.00 per copy! Get them while you can! |
|
||
| Krate Springer Forks
Schwinn Reproduction Same as 1998-2000 Krates. NICE! Sorry, No Longer Available :-( |
 
|
||
| Krate fender, same as 1998-2000 Krates. NICE!
with RIVETED braces! These fenders fit ALL Krates from 1968-2000! Sorry, No Longer Available :-( |
 
|
||
| Krate Coaster and 5 speed
CHROME chainguards. Same as 1998-2000 Reproductions. The 5 speed one is nice, but not entirely accurate, it is great for a "Rider". Coaster $25.00 each |
 
|
||
| TIRES!! | A $5.00 fee is added to all Tire orders under
$100.00 for packaging. Orders totaling more than $100.00, will be
charged at normal shipping prices. Clik on pics for larger images. |
||
| Schwinn Re-Issue Superior, 16x 1 3/4" for S-7
rim **Sorry, not available :-(
BUT, I do have in-stock, import Superior-like tread tires for $16.00. These will work great but do not say "Schwinn" on them except in the "To Fit S-7 Schwinn Tubular Rim" printed on the sidewall. BACK IN STOCK!!!
|
  |
||
| Fastback Sliks...Sorry guys, these will no longer be available :-( |
  |
||
| Schwinn Re-Issue Raised White Letter Slik, 20x 2.125" for S-2 rim. Nice!! Sorry, no longer available. |   
|
||
| Schwinn Re-Issue Blackwall Slik, 20x 2.125" for S-2
rim No Longer Available :-( |
 
|
||
| Schwinn Re-Issue Whitewall Westwind, 20x 1 3/4" for
S-7 rim
Sorry, DISCONTINUED :-( |
 
|
||
| Schwinn Re-Issue Blackwall Westwind, 20x 1 3/4" for
S-7 rim
These will NO LONGER BE AVAILABLE sorry :-( |
  
|
||
| Schwinn Re-Issue Fastback front tire, 20x 1 3/8"
for S-5 & S-6 rim
Sorry, discontinued :-( |
  
|
||
| Schwinn Re-Issue Whitewall Knobby, 20x 2.125" for
S-2 rim
Sorry, discontinued :-( |
  
|
||
| Schwinn Re-Issue Blackwall Knobby, 20x 2.125" for
S-2 rim No longer available |
  
|
||
| Wald 1970-up Handlebars, Nice with Correct Plating and Correct Knurling (but they say "Wald" not "Schwinn") $20.00 |
 |
||
| Chrome Ball Headlight.
Uses 2 "C" cells. Not Schwinn, but it's a few hundred
dollars cheaper. Only $29.00
In Stock!! |
|
||
| Krate & Sting-Ray 1966-up Sissybar, Nice with clamps, $28.00 |
 |
||
| "Collectable Schwinn
Sting-Ray Bicycle" book. This was written/compiled by Jim Hurd and
his wife. He was the Curator of the Schwinn Museum. It is 178
pages of Dealer Literature Xeroxed. Sales catalog pages, part number
listings, some shop manual blow-ups...not much writing, but lots of
great info! Yours for only $22.00!! |
 |
||
| Shift Knobs, Spoke Protector, Derailleur Cap and Shifter Overload Tube: |
|
||
| 1966-1968 5 speed shift knob, with correct heat-stamped silver "5" |
$18.00 |
||
| 1969-Early shift knob, with silver "disc" |
$18.00 |
||
| 1970-up shift knob, with "5" disc! |
$18.00 |
||
| NOS 5 Speed spoke protector | not available | ||
| 5 Speed shifter overload tube, Awesome Reproduction! | $35.00 No Longer Available |
||
| Black plastic Derailleur pivot cap, with gold trim | $9.00 No Longer Available |
||
| 4 piece Stik-Shifter screw set | $4.00 | ||
| 5 piece Stik-Shift washer, nut & fibre washer set | No longer available | ||
| Tech: To remove original shift knob, wrap handle in 3 layers of newspaper, PUT ON SAFETY GOGGLES, put on concrete surface and hit with a heavy hammer. Remember the safety goggles! Install new knob with "JB Weld" epoxy, available at any auto parts store. | |||
| '63-'64 Square-Back Sissybar reflector hanger $12.00 |  |
||
| Head
Badges: Exact! Made by the Original Manufacturer! |
 |
||
| Black with White Letter Head Badge | $10.00 | ||
| White with Black Letter Head Badge | $10.00 | ||
| Buy 20+ badges, mix or match, save $2.00 each! | $8.00 each for 20+ | ||
| Early Non-Chi Town badge. Correct
for 1963-64 Sting-Rays No longer available. About 50% had silver "R", 50% black. As far as I can tell through research, year did not matter. These are black. |
 |
||
| Head Badge screws, pair | $1.00 | ||
| Springer Parts: |
 |
||
| Krate Truss Rods, Exact! Pair | No Longer Available | ||
| 20" Truss Rods, Exact again! Pair | No Longer Available | ||
| Krate/Super Deluxe Fork Spring, Awesome | No Longer Available | ||
| Chrome Bumper Cap | No Longer Available | ||
| Import Triple Note Horn Same as stock, but without part number stamping $15.00 |  |
||
| Kickstands:
Correct Chrome or Cad Plating. Includes collar, pin and washer. (Kickstands Do Not include cam, white cap, spring or retainer pin.) |
  |
||
| -339 Kickstand, fits Non-Disc Krates and others | No Longer Available | ||
| -339 CHROME Kickstand for 65-67 full-size Sting-Rays | No Longer Available | ||
| -337 Fastback Kickstand, Cad Plate for 1968- | No Longer Available | ||
| -337 Fastback CHROME Kickstand for 1966-1968 | No Longer Available | ||
| Early 63 thru mid-65 small-frame Sting-Ray NOS CHROME Kickstand, bare, no hardware | No Longer Available | ||
| -365 Kickstand, fits Disc Brake Krates and others | No Longer Available | ||
No Longer Available |
 |
||
| Just In! A limited run
of Krate front Cable Klips, Rear Fender "L" Brackets and
Rear 5 Speed Chainguard Brackets. "L" Bracket $5.00 each Cable Klip **Back In Stock!** $12.00 each! Rear Guard Bracket $15.00 each |
 |
||
| Krate Front Fender Hanger Assembly $15.00 |  |
||
| Disc brake set of two plastic
guide bushings. These are the correct nylon-type white plastic bushings.
A finishing touch! out of stock :-( Disc brake sticker $5.00 |
 |
||
| Park Freewheel Removal Tool, A "Must Have" to remove 5 speed freewheels! Very Hard To Find. Only $8.00! |
 |
||
| Park Kickstand Tool
The elusive "Must Have" tool is once again available! This is the original one that really works. Complete with instructions. Only $60.00 each. This tool will last a lifetime. Get with your buddies and buy a "Community" one, you won't regret NOT scratching your paint while installing your kickstand with a couple screwdrivers on a Sunday....Doh! ATTENTION: The Park Kickstand tool has once again been
discontinued from the manufacturer :-( |
 |
||
| NOS Speedometer hardware set with
Speedocable anchor strap
No longer available |
 |
||
| Small Parts: |
 |
||
| Reflector wire hanger. For seats without welded tab | No longer available | ||
| Five speed chainguard rear bracket, correct plating | $15.00 | ||
| NOS Krate front and disc rear brake adjuster, with lock ring | $12.00 | ||
| White kickstand and sissy bar cap | NOW, back in STOCK! $1.50 each while they last! 10 for $12.00, save $3.00! |
||
| 3-5 speed fender "L" bracket at rear brake caliper | $5.00 | ||
| Krate front Atom brake stopper bolt and nut. | $16.00 | ||
| Springer "Pivot" nut, with
correct thread pitch! $7.00 |
Springer Pivot Bolt $15.00 |
||
| NOS "AS" seat post clamp bolt | $8.00 | ||
| Handlebar binder bolt NICE! | $10.00 | ||
| Wald chrome seat post. Not original, but looks great. $8.00 |
 |
||
| Krate Seat Shocks: |
 |
||
| MY reproduction, awesome! Correct textured plating on tubes, correct clamp plating, correct hardware with correct plating. Set includes: Tubes, clamps, 4 caps, springs, bushings and all hardware | No Longer Available | ||
| Shock tubes only | No Longer Available | ||
| Four shock caps & two washers only | No Longer Available | ||
| Shock Klamps only | IN STOCK $50.00/pair | ||
| Pair of shouldered shock nuts only | $10.00/pair | ||
| Tech: 4 holes need to be drilled in sissy bar to mount shocks. 2 are 1/2" from the bottom of the bar and 2 are 7 1/4" from the bottom of the bar. Drill them just big enough to hold the pins lightly. |  |
||
| 68- Krate "Pogo" shock: |
 |
||
| 1968- Krate "Pogo" front seat shock, Awesome! | Sorry, out of stock :-( | ||
| Krate seat washer set. Note assembly order above, use your existing clamp. | $10.00, while they last. | ||
| Double Cable Klamp, behind shifter. Includes screw and nut | $20.00 | ||
| Four piece shifter screw set | $4.00 |
