|
|
Calista, the anoREXic Wench |
|
You guys have been asking me to do service on your ZRX's. I am accepting work by appointment. My labor rate is $45.00 a flat rate hour, around half the normal shop rate. Parts will be at RonAyers.com prices. Examples: Valve Adjustment, w/emissions intact $180.00 All above examples plus parts and fluids.
|
|
|
KWICK Side Cover Plaques! All available in Aluminum or Brass. All hand painted by me, so I can do some custom colors/styles. $125.00 a pair As of 6/11/09, I have one pair of "1109 Six Speed" in Brass, in stock, ready to ship. These REALLY puzzle the average guy :-)
CURRENTLY TAKING |
|
   |
Most of you know RaceTech makes GoldValve kits
for the ZRX. |
|
ZRX RC Cola/Moon Pie Table The New ELS RC Cola tables are ready to go. You can work on the top-end, you can work on the tranny/crankshaft or you can just display your extra motor in the living room! The table flips over easily and is INCREDIBLY strong! I was jumping up and down on the motor upside down and there's not a hint of flex. The lower case easily removes with the table upside down. The
top comes off with four bolts and top end work is a breeze! No more
chasing the motor around the floor :-) If you ever do motor work
on a ZRX, you need this! You'll need to supply your own tempered glass, butcherblock or Corian etc top if you choose to use it as a table. The top is 21-3/4" deep by 19-1/4" wide (18-1/2" inside). The table is 25" tall. The table has a brushed aluminum finish. It can be left as-is,
painted, polished, anodized or you can stick all those huge Ivan's and
Muzzys stickers you have on it. or $125.00 plus $15 shipping for just the four waterjet cut aluminum plates (you suppy the allthread, pipe and hardware with this option). Buy one for your bench-race group and you can share :uptosum: This is one of my KOOLEST projects to date!! |
    |
|
|
|
|
ZRX Slipper Clutch The real thing! A slipper clutch based on the ZX7R Factory one. A mix of used parts, new Kawasaki parts and new ZX7R "Race Kit" parts. Very easy to install. The Japanese racers claim this setup will hold 170+ hp. See the reviews on the ZRXOA.com Owners' Forum. If you do track days, or ride VERY aggressively on the street, you need one of these. Market price may vary, but currently $325.00
will get you one TRICK slipper clutch! A 36mm socket is required for install. (To lighten it up a bunch, you can order a Zephyr 1100 inner hub from Moriwaki Man in Japan. He's on the ZRXOA Forum. Order part number 13087-1144 from him. This hub does not contain the heavy spring & cam damper setup that the standard one has. This is not necessary, but it makes a trick addition!)
In Stock! |
|
    
|
Temp Gauge Fits in place exactly like the fuel gauge, see shop manual. Remove tank, fairing, gauge cluster etc. You hitch up the wires exactly the same as the stock fuel gauge on the back. Remove the idiot sender and wire, tape wire end to keep from errant blinking. You remove the white w/yellow tracer wire from the fuel sender, attach the included wire end and boot, install the included sensor in place of the stock idiot sensor...do NOT used teflon tape!! The sender must ground. Use a pipe sealant or Permatex #1 or #2 sealant or silicone made for water sealing... and connect the wht/yellow wire to it. Installation is complete. The dead center of the gauge, which also is marked with a black line, is calibrated by me on each individual gauge to be 212 degrees F (100 degrees C), the temp that the fan will fire up at. See the pics below for 212 and ice water 32 degree positions. The sender is brand new Kawasaki. The gauge core is used, tested, Kawasaki...Kaw has discontinued the only gauge that is adaptable to this application, so they are only available used. The gauge face plastic is laser cut for me and I make the gauge face to apply to it. I cannot make the face white...well, I probably could but... As I said, the gauge is used and market price and availability may vary. The gauge assembly, temp sender, wire connector and phone tech support: $135.00 plus $5.00 shipping. PayPal to: Pete@Hyper-Formance.com Plastic: 480-961-0643 Optional: two sender thermostat housing, $55 each exchange. Second bung for mounting second sender welded on. With this, you can keep the idiot light and the gauge. (The white plastic in the pic is my test stand wiring setup) This is really a neat setup as you can view the water temp out of the corner of your eye easily. No biggie Ewe say?? I had a Yoshimura digital gauge on 'er and when I would do track days I had to force myself to take my eyes off the track, and then convert number to "Hot? Cold? OK?" thought. Most times I never looked at it until I was on the pit road. A analog gauge is what Ewe need in a hy-po situation...ask any racecar driver. Anyway, the first local guy that buys one and comes by will get free install help so I can take photos for the installation instructions....but, it really is a straight forward install and the shop manual covers it all. It should not take you more than an hour or so if you are reasonably good with a wrench. |
KWICK Kool
Lightweight Radiator Fan Bracket to fit GSXR fan & motor. Save 12
ounces of weight that is just waiting to fracture your expensive
radiator! (Fan & motor not included)
Complete Fan/Bracket Assembly |
  |
 Super-Lightweight Aluminum Thermostat Bracket Why? Because a pallet holding a ton of feathers can crush you, that's why! $15.00...start your addiction here :-) |
|
| Pete Aronson aka KWICK www.Hyper-Formance.com 6305 West Del Rio Street Chandler, AZ 85226-1726 |
 |
| (480) 961-0643 from 10 a.m. - 5:00 p.m. Pacific | PayPal to: Pete@Hyper-formance.com |
| (602) 397-4869 cell |
--> Print Order form, fill out form completely and mail with payment, or
fill out & submit online.  |
